How to Print Stickers at Home ,Tricks and Benefits of Printing in 2022

In the modern world, stickers play a much more vital role than just decorating stuff. They are now used in everyday as well as professional life. Be it as warning signs, advertising proposes, labelling containers or just spreading information in an aesthetically pleasing way, printing stickers has become the new norm of the world.

how to print sticker

But as much as these stickers are adored by everyone, there are also many doubts about how to make them at home for a cheaper rate than that it is sold at. If you also have questions related to printing stickers at home or office, then you have come to the right place to get them answered! Read our article thoroughly to learn in detail about how to make and print stickers from scratch.

What do you need to make stickers?

Before we start the guide about making stickers, you should make sure to have all of its mandatory stationary at home. The first thing that you need is a sharp cutting tool to even out the edges of your stickers. This can be done by either using a scissor or utility knife.

Next, you need to decide what type of sticker printing you intend to carry out and assemble equipment according to that. A wide transparent adhesive tape, parchment, vinyl and sticky glue are some essentials for all types of stickers. You also need warm water in small quantities to cure the sticker after it has been printed and any other additional details like glitters, paints and ornaments to decorate your sticker.

Lastly, the most important thing for sticker printing is to use the right printer for it. You can choose between numerous printers from brands like HP and DYMO, depending on whether you want to carry out vinyl, logo or photo printing with it and what features you need in these machines.

Types of films available to make stickers

There are different types of film available for different forms of vinyl stickers. You should choose between these options depending upon where you plan to use and stick stickers on. These include:

  • Standard quality: used for short-term and low-quality stickers. It is also relatively easy to use, best film for beginners
  • High quality: used for lining cars and other slippery surfaces. It is difficult to use and needs a hairdryer, making it unsuitable for DIY processes at home.
  • Reflective: used for decorative, outerwear, and safety signs on roads. Last for a long time and are commercially produced.
  • Transparent: used for contour stickers with no backdrop color or picture.

How to print stickers at home?

Preparing the adhesive composition

Before you begin printing stickers from a printer, you need to prepare a special adhesive composition that helps to stick your sticker in different places. For this, you need a whole bag of gelatine, one teaspoon of sugar, two to three drops of aromatic extracts, and 40 milliliters of heated water. Mix all of these ingredients to make a smooth adhesive glue and store it in a tightly packed container at low temperature.

Designing the sticker

Once you have prepared the adhesive glue for your sticker, it is time to design the sticker digitally. There are many apps available to make a sticker on, the most popular options include Photoshop, Microsoft Office and Adobe Editor. Some printers also have specialised software that include a vast sticker template library to browse through.

Printing the sticker

For the next step, you need to use the right printer to print your customized sticker from. Use either an inkjet, laser, sticker or label printer to print your previously designed sticker on and load it with sticky pages. When you have finished printing this, use a sharp scissor or knife to cut the excess edges out.  Next, lay out the cut-out flatly and spread your refrigerated adhesive glue on its backside.

You can also make single or dual side tape stickers by applying adhesive tapes on each side smoothly. Make sure to remove any air bubbles and take extra care to avoid overlapping of tape. Finally, laminate these stickers by hand or through a laminating machine.

Another option to make stickers is using parchment but in this case, remember to leave extra inches on the edges of your printed sticker. Similarly, cut off parchment in a generous amount and glue the scotch tape to it. Paste the printer sticker on the parchment and evenly cut it out to get the final product.

Preparing the printed sticker

For the second last step of making stickers, you should put your finished product in a warm water container for about five to ten minutes. This would allow the sticker to cure and prepare it for use. Lastly, take the sticker out and remove its paper layer carefully, allowing it to completely dry.

Laminating the sticker

Although the laminating process is a little pricey to bear, it is a great way of making your non-vinyl stickers waterproof and thereby, increasing their longevity. For this, purchase the right type and size of laminating sheet from glossy, matte and other available textures. Now stick them onto your printed sticker sheet and peel them back part way while removing any air bubbles. If lamination is an option too expensive for you, you can try sprinkling acrylic spray for guaranteed water and sunlight resistivity.

Tips for printing stickers at home

Although printer stickers are a relatively user-friendly task to carry out, there are still few pointers you should always keep in mind when doing so. The first thing is to read the instruction manual of your sticker printer carefully. Go over its specifications to make sure it supports your desired label or sticker printing and accepts the pages you plan to use it on.

A general suggestion is to always prefer a laser printer over an inkjet one if resistivity to water is important to you. Since laser printing uses a dry toning mechanism, it is less likely to smudge due to intense heat, pressure or water as compared to an inkjet printer. Moreover, always run a test print before actually sending your sticker page to the printer. This helps you make any needed adjustments beforehand and save you from wastage of paper, time and effort.

As soon as you have finished printing stickers for use, store them in separate containers. These containers should be kept in a cool and completely dry place, protected from sunlight and water. Many other factors like extreme temperatures and overlapping of stickers can adversely affect the quality of your stickers and the adhesive applied on their backside. 

Benefits of printing stickers at home

Now that you have understood the process of printing stickers yourself, let us talk about the benefits of doing so at home or office.

  • Buying customised printed stickers for advertising your brand is not only quite pricey but it may not be up to your expectations as well. Whereas, printing stickers is budget friendly since most of the essential tools are already available in many households.
  • Another huge benefit of DIY stickers is the much-improved quality and longevity. They are designed to be resistant towards sunlight and water with the sticky paper and good quality laser or inkjet printer they are made from. Because of this, you can stick your customised stickers outdoors without worrying about ruining its quality and colours!
  • Thirdly, different types of stickers are designed to stick on different surfaces. When you print stickers yourself, you can rightly choose a printer that supports sticking on your desired surfaces be it wood, cardboard or plastic. Printing stickers yourself is a hobby that not only many enjoy but benefit from too!


With the right tools and a comprehensive to-do guide present with you, making and printing stickers can be a quite fun and creative experience. Plus, the added benefits of making stickers at home including its waterproof quality and cost make it one of the most productive leisure activities. We hope our guide helps you have utmost fun and make freestyle creative stickers the right way!